How to Do Drywall Repair

Drywall repair is an essential home improvement project, but it can also be a DIY job that requires special tools and knowledge. Before you begin, identify the type of damage and the drywall thickness. The top drywall repair expert will help you choose the proper joint compound and materials to use.

Whether you're repairing a small ding or a large hole, the scale of your project will have an impact on the amount of time and money it takes to complete. Minor dents or scratches can be fixed with spackle, while larger holes require mesh drywall tape, a new patch and drywall compound.

How much drywall compound or spackle you need depends on the size of your hole, as well as how deep it is. Small dents or scratches need just enough filler to hold them in place without damaging the wall. You'll also need a putty knife and sandpaper for the sanding and painting process.

The cost of drywall repair will vary depending on the type of damage, how extensive it is and the room in which it occurs. For example, a crack that runs only one wall of a house may cost $60 to caulk, while a crack that extends across multiple walls can cost $330 or more.

For a small ding or scratch, the most basic method is to fill it with a thin layer of drywall mud (also known as "joint compound"). This can be applied with a 3- to 4-inch putty knife, and you'll need to sand and smooth it until it's flush with the surrounding wall.

If the ding is in a corner, you'll want to use a special drywall inside-corner knife to ensure a strong seal. This tool has a narrow blade that allows it to get under and between the corner beads and the seams of the drywall.

Once the area has been filled, you'll need to sand and apply a second coat of joint compound. Repeat this step a few times until you're happy with the results.

To reinforce a larger hole, you'll need to add small pieces of wood, called furring strips or backer boards, along the sides of the hole. These will help prevent shifting of the drywall and reduce the risk of cracks. To understand about drywall repair services, click here for more info.

When you're ready to complete the drywall repair, you'll need a piece of drywall that's at least twice as large as the hole, a utility knife, a carpenter's square, a stud finder and a level. You'll need to use a level to mark the studs, as utilities like electrical wires and plumbing run along them.

Using the stud finder, locate the wall studs nearest to each side of the hole. Once you've identified them, draw a line with the carpenter's square to indicate where you'll cut the damaged area.

Make sure to extend the cut out area at least an inch from the top and bottom of the hole, and between the centers of each stud on either side of it. This will allow you to remove the damaged drywall safely and securely. Click here for more details about this service: https://en.wikipedia.org/wiki/Wall.